Cuttlefish and Faceted Blue Kyanite Ring 18K, 14K, 10K Yellow Gold
This cuttlefish cast ring features a natural untreated blue kyanite that was faceted from rough originating in Brazil. The ring is crafted from 18K, 14K, and 10K yellow gold. The kyanite and cuttlefish portion measures approximately 32mm (1.3″) long x 9mm (.35″) wide. The bands are 1.7mm wide each, and the total width of the band tapers from 11.5mm to 3.5mm. Size 7.5 available.
1 in stock
- Materials and Sizes
10K Yellow Gold, 14K Yellow Gold, 18K Yellow Gold
- Ask Us a Question
- Caring for Your Jewelry
Caring for Your Jewelry
CHRISTOPHER TAYLOR TIMBERLAKE FINE ART JEWELRY
PRODUCT CARE INSTRUCTIONS
To prolong the life of your fine jewelry and protect it from damage, we recommend the following care:
Activities to Avoid While Wearing Your Jewelry:
The following activities will expedite the speed of oxidation of your jewelry, and potentially cause damage, especially to stones. Therefore, it is recommended that you do not wear your jewelry while:
- Using cleaning chemicals;
- Applying lotions and perfumes;
- Lifting heavy objects (e.g. lifting free weights, carrying metal furniture, yard work, etc.);
- Washing dishes;
- Engaging in any activity that results in a sustained amount of time in water;
- Engaging in any activity with potential damage to the hands, such as rock climbing, auto repair, construction, etc.
Recommended Cleaning of Your Jewelry:
- Use a mild, non-abrasive soap and warm water.
- For particularly dirty jewelry, gently clean using a soft toothbrush with mild soap and water.
- You can remove tarnish from silver on the inside of a ring with a silver or general jewelry polishing cloth. (NOTE: if you use a polishing cloth on the patterned Mokumé surfaces, the polish may temporarily make the pattern difficult to see. The pattern should return as the metals oxidize in reaction to the environment.)
- If a polished stone inlay has become dull, you may want to return it to us for re-finishing.
- Ring Fitting
We highly recommend visiting at least two to three reputable jewelers to have your finger sized. They should use standard fit sizers, and they should agree on the size. It is also important to tell the jewelers how wide your ring will be since width is a determining factor in sizing.
Meteorite rings and rings with inlay cannot be re-sized.
- About the Cuttlefish Process
About the Cuttlefish Process
Metal is cold-cast into the hollowed-out bone of a cuttlefish. The cuttlebone is unique to the cuttlefish, a cephalopod, and contains layers of porous calcium carbonate. The interior of the bone is soft enough to carve with your fingernail and when the calcium detritus is blown away a layered terracing is exposed which determines the surface of the casting. In some pieces the resulting metal casting is cut and shaped into another form using the layers inherent in the bone as a guide.