Cuttlefish Cast 10K Yellow Gold Ring with Gem Silica Inlay
This 10 karat yellow gold ring is cast in a carved cuttlefish bone. A gem silica inlay is meticulously crafted to match the ridges inherent in the metal casting. The ring has a variable width of approximately 4.8 – 6.1 mm and a thickness of approximately 2 mm. The inner band is stainless steel. Each cuttlefish casting and pattern is unique.
*Rings with inlay cannot be re-sized*
*To avoid the possibility of damage to the stone, rings with inlay should be removed prior to activities such as: weightlifting, rock climbing, swimming, gardening, washing dishes, etc*
Each stone is unique. Color may vary.
$1,440.00 – $1,625.00
Special Order Only - Allow 6 to 8 Weeks
- Materials and Sizes
Additional information
Metal 10K Yellow Gold, Stainless Steel
Process Cuttlefish
Size 4 – 7.75, 8 – 11, 11.25 – 14
Stones Gem Silica
- Ask Us a Question
- Caring for Your Jewelry
Caring for Your Jewelry
CHRISTOPHER TAYLOR TIMBERLAKE FINE ART JEWELRY
PRODUCT CARE INSTRUCTIONS
To prolong the life of your fine jewelry and protect it from damage, we recommend the following care:
Activities to Avoid While Wearing Your Jewelry:
The following activities will expedite the speed of oxidation of your jewelry, and potentially cause damage, especially to stones. Therefore, it is recommended that you do not wear your jewelry while:
- Swimming;
- Using cleaning chemicals;
- Applying lotions and perfumes;
- Lifting heavy objects (e.g. lifting free weights, carrying metal furniture, yard work, etc.);
- Washing dishes;
- Engaging in any activity that results in a sustained amount of time in water;
- Engaging in any activity with potential damage to the hands, such as rock climbing, auto repair, construction, etc.
Recommended Cleaning of Your Jewelry:
- Use a mild, non-abrasive soap and warm water.
- For particularly dirty jewelry, gently clean using a soft toothbrush with mild soap and water.
- You can remove tarnish from silver on the inside of a ring with a silver or general jewelry polishing cloth. (NOTE: if you use a polishing cloth on the patterned Mokumé surfaces, the polish may temporarily make the pattern difficult to see. The pattern should return as the metals oxidize in reaction to the environment.)
- If a polished stone inlay has become dull, you may want to return it to us for re-finishing.
- Ring Fitting
Ring Fitting
We highly recommend visiting at least two to three reputable jewelers to have your finger sized. They should use standard fit sizers, and they should agree on the size. It is also important to tell the jewelers how wide your ring will be since width is a determining factor in sizing.
Meteorite rings and rings with inlay cannot be re-sized.
- About the Cuttlefish Process
About the Cuttlefish Process
Metal is cold-cast into the hollowed-out bone of a cuttlefish. The cuttlebone is unique to the cuttlefish, a cephalopod, and contains layers of porous calcium carbonate. The interior of the bone is soft enough to carve with your fingernail and when the calcium detritus is blown away a layered terracing is exposed which determines the surface of the casting. In some pieces the resulting metal casting is cut and shaped into another form using the layers inherent in the bone as a guide.
- Special Orders
Special Orders
Delivery time is 6 to 8 weeks. Rush deliveries are available for an additional fee. Engraving is available upon request and ranges in price from $15-$30.
A modified special order based on this design can be created. Special order pieces can be made in alternate metals, and the inlay, center stone, and accent stones (if applicable) can be changed based on your preferences in most cases. Please contact us for more information using the “Ask us a Question” form on this page.
Every piece is handmade. Variations will occur.
For a completely custom design, please visit our Custom Designs page.
-
