Cuttlefish Cast 14K Yellow Gold Ring with Lavender Jade and Lilac Spinel

cuttlefish-gold-ring-with-lavender-jade-and-lilac-spinel-2cuttlefish-gold-ring-with-lavender-jade-and-lilac-spinel-1cuttlefish-gold-ring-with-lavender-jade-and-lilac-spinel-4cuttlefish-gold-ring-with-lavender-jade-and-lilac-spinel-3cuttlefish-gold-ring-with-lavender-jade-and-lilac-spinel-5

This remarkable 14 karat yellow gold, cuttlefish cast, fabricated, and carved ring features lilac spinel and lavender jade. The hand-faceted spinel is bezel set in 14 karat yellow gold, and is approximately 5.8 mm (~0.80CT). The carved jade inlay is 1.75 mm wide. The total width of the ring varies between 4-5 mm. For additional strength the inner band is stainless steel (not pictured).

Each cuttlefish casting and pattern is unique.

*Rings with inlay cannot be re-sized*

*To avoid the possibility of damage to the stone, rings with inlay should be removed prior to activities like weightlifting, rock climbing, swimming, gardening, dish washing, etc.*

*Every stone is unique. Colors may vary.

SKU: N/A

$2,470.00 – $2,605.00

Special Order Only - Allow 6 to 8 Weeks

Please select a size.
  • Materials and Sizes

    Additional information

    Metal

    14K Yellow Gold

    Process

    Cuttlefish

    Stones

    Jade, spinel

    Size

    4 – 7.75, 8 – 11

  • Ask Us a Question

    Ask Us a Question

    Fill out the form below with your question and we will respond as soon as possible. Thank you.







    • Caring for Your Jewelry

      Caring for Your Jewelry

      CHRISTOPHER TAYLOR TIMBERLAKE FINE ART JEWELRY

      PRODUCT CARE INSTRUCTIONS

      To prolong the life of your fine jewelry and protect it from damage, we recommend the following care:

      Activities to Avoid While Wearing Your Jewelry:

      The following activities will expedite the speed of oxidation of your jewelry, and potentially cause damage, especially to stones. Therefore, it is recommended that you do not wear your jewelry while:

      • Swimming;
      • Using cleaning chemicals;
      • Applying lotions and perfumes;
      • Lifting heavy objects (e.g. lifting free weights, carrying metal furniture, yard work, etc.);
      • Washing dishes;
      • Engaging in any activity that results in a sustained amount of time in water;
      • Engaging in any activity with potential damage to the hands, such as rock climbing, auto repair, construction, etc.

      Recommended Cleaning of Your Jewelry:

      • Use a mild, non-abrasive soap and warm water.
      • For particularly dirty jewelry, gently clean using a soft toothbrush with mild soap and water.
      • You can remove tarnish from silver on the inside of a ring with a silver or general jewelry polishing cloth. (NOTE: if you use a polishing cloth on the patterned Mokumé surfaces, the polish may temporarily make the pattern difficult to see. The pattern should return as the metals oxidize in reaction to the environment.)
      • If a polished stone inlay has become dull, you may want to return it to us for re-finishing.
    • Ring Fitting

      Ring Fitting

      We highly recommend visiting at least two to three reputable jewelers to have your finger sized. They should use standard fit sizers, and they should agree on the size. It is also important to tell the jewelers how wide your ring will be since width is a determining factor in sizing.

      Meteorite rings and rings with inlay cannot be re-sized.

    • About the Cuttlefish Process

      About the Cuttlefish Process

      Metal is cold-cast into the hollowed-out bone of a cuttlefish. The cuttlebone is unique to the cuttlefish, a cephalopod, and contains layers of porous calcium carbonate. The interior of the bone is soft enough to carve with your fingernail and when the calcium detritus is blown away a layered terracing is exposed which determines the surface of the casting. In some pieces the resulting metal casting is cut and shaped into another form using the layers inherent in the bone as a guide.

    • Special Orders

      Special Orders

      Delivery time is 6 to 8 weeks. Rush deliveries are available for an additional fee. Engraving is available upon request and ranges in price from $15-$30.

      A modified special order based on this design can be created. Special order pieces can be made in alternate metals, and the inlay, center stone, and accent stones (if applicable) can be changed based on your preferences in most cases. Please contact us for more information using the “Ask us a Question” form on this page.

      Every piece is handmade. Variations will occur.

      For a completely custom design, please visit our Custom Designs page.

    You may also like…